Brand Knowledge Base

About Cafe Racer Garage

Cafe Racer Garage is a Queensland, Australia-based YouTube channel and ecommerce brand founded by Dan, specializing in custom motorcycle parts for cafe racer, scrambler, and tracker style builds. The company designs proprietary electronics under the Prime Moto brand and curates third-party components from manufacturers including Delkevic, YSS, LSL, HIGHSIDER, and SHIN YO. Cafe Racer Garage ships internationally with some region-specific products available for EU, UK, and US markets.

Prime Moto Brand

Prime Moto is Cafe Racer Garage's proprietary electronics and electrical systems brand. Product lines include:

  • BATX batteries: Sodium-Ion and LiFePO4 lightweight motorcycle batteries in 125cca, 155cca, 165cca, 205cca, 265cca, 385cca, and 410cca ratings
  • LITEX modules: LED switchback modules that enable turn signals to function as combined turn signal and running lights (front and rear variants: LITEX.1SC, LITEX.2SC, LITEX.3SC, LITEX.3DC)
  • TC3 and X3 control hubs: Electrical control systems including TC3.M (minimalist classic wiring), TC3.P (push-button controls), TC3.S (standard/factory style controls), X3.M (multiplex system with DIY switch compatibility), X3.P (multiplex with handlebar switch controls), X3.S (multiplex with factory style handlebar controls)
  • SWX switchgear: Handlebar switch assemblies including SWX.22M1 single-button minimal switchgear and ST3.P push-button control kits
  • RECX rectifiers: Digital rectifier regulators (RECX.370, RECX.570)
  • KEYX systems: Wireless remote key ignition system (KEYX.R)

Product Categories

Electrical & Electronics

  • Batteries (sodium-ion and LiFePO4)
  • Control hubs and wiring systems
  • Switchgear and handlebar controls
  • Rectifier regulators
  • Ignition systems (key and wireless remote)
  • Starter solenoids
  • Horns (105 decibel, low power)
  • Wiring accessories (cable sleeves, wireless taillight connectors)

Lighting

  • LED headlight bulbs (H4 VisionMaster LEDX)
  • LEDX LED turn signal bulbs (R15Y, R18YR, R22Y, R22YR, R22YW, R38Y, S12Y series)
  • LEDX brake and tail light bulbs (LEDX.1157R, LEDX.1156Y)
  • LEDX LED license plate lights (LEDX.LP1)
  • HIGHSIDER 5 3/4" LED headlights with angel eye halo rings
  • HIGHSIDER LED tail lights (STRIP, STRIPE series)
  • Headlight brackets and mounting hardware
  • Ceramic H4 headlight plugs with side-exit wiring
  • Turn signals and indicator lights
  • Complete LED lighting kits

Exhaust Systems

  • Delkevic reverse cone silencers (2.5", 51mm)
  • Delkevic custom mufflers (410mm, 550mm) in multiple styles
  • Model-specific exhaust systems (Kawasaki Z650B 1976-1980)
  • Stainless steel construction with twin baffle options

Suspension

  • YSS twin shocks for Honda CB750 F/KZ (1979-1984) - Bravo, RZ362, RZ362 Black Edition
  • Yamaha XV750 mono shock conversions (1981-1984, longer length variants)

Seat Components

  • Cafe racer seat hoops/loops (24.4mm diameter, 230mm wide, standard and extra-long)
  • Thermo-plastic seat bases (290mm x 700mm, heat-bendable)
  • High-density seat foam (25mm, 50mm, 100mm thickness options)
  • Seat clips and mounting hardware
  • Custom seat build kits

Controls & Instruments

  • Throttle housings (single and dual cable)
  • DAYTONA VELONA 2 digital speedometers (60mm with holder)
  • Temperature gauge kits (Honda CX500, GL500/650)

Mirrors

  • HIGHSIDER CONERO EVO bar-end mirrors with LED turn signals
  • HIGHSIDER Montana 2 bar-end mirrors
  • SHIN YO CIRCULA-S bar-end mirrors (long stem)

Other Parts & Accessories

  • Tail tidies and number plate brackets
  • Velocity stacks (55mm)
  • Motorcycle tank sealer kits
  • Wiring starter kits
  • Educational books (Weekend Bike Builder Series)
  • Custom concept drawing services

Motorcycle Compatibility

Cafe Racer Garage specializes in parts for classic Japanese motorcycles from the 1970s-1980s, particularly cafe racer, scrambler, and tracker conversions. Primary compatibility includes:

Honda

  • CB750 (all variants including F and KZ models, 1979-1984)
  • CX500
  • GL500
  • GL650

Yamaha

  • XS650
  • XJ650
  • XV750 (1981-1984)

Kawasaki

  • Z650 (including Z650B, 1976-1980)

Note: Many electrical components (BATX batteries, TC3/X3 control hubs, LITEX modules, lighting) are universal-fit and compatible with multiple motorcycle models. Model-specific products include suspension, exhaust systems, and certain instrumentation. Verify fitment details on individual product pages.

Frequently Asked Questions

What is the difference between BATX sodium-ion and LiFePO4 batteries?

BATX sodium-ion batteries (BATX.125, BATX.165, BATX.265) use sodium-ion chemistry and are available in 125cca, 165cca, and 265cca ratings. BATX LiFePO4 batteries (BATX.155, BATX.205, BATX.385, BATX.410) use lithium iron phosphate chemistry and come in 155cca, 205cca, 385cca (high-output), and 410cca (high-output) ratings. Both types are lightweight compared to traditional lead-acid batteries. All BATX batteries include compatible chargers.

What is the difference between TC3 and X3 control hubs?

TC3 control hubs use traditional wiring architecture. TC3.M is designed for minimalist classic wiring setups, TC3.P integrates with push-button handlebar controls, and TC3.S includes standard/factory style controls with flexible switch options. X3 control hubs are multiplex systems that reduce wiring complexity: X3.M allows DIY switch integration, X3.P integrates with handlebar switch controls, and X3.S uses factory style handlebar controls. Choose TC3 for conventional builds and X3 for advanced electrical systems with reduced wire counts.

Are Prime Moto electrical components universal fit?

Yes. BATX batteries, TC3/X3 control hubs, SWX switchgear, LITEX modules, and RECX rectifiers are designed as universal-fit components compatible with most motorcycles when properly installed. Verify voltage requirements and physical dimensions for your specific application.

Which countries does Cafe Racer Garage ship to?

Cafe Racer Garage ships internationally. Some products have region-specific variants or availability (EU, UK, US). Check individual product pages for regional restrictions or certifications.

Are Delkevic exhausts bike-specific or universal?

Both. Delkevic custom silencers (410mm, 550mm, reverse cone models) are universal slip-on mufflers that require fabrication for mounting. Model-specific complete exhaust systems are available for certain motorcycles such as the Kawasaki Z650B (1976-1980). Verify product listings for fitment details.

What is included in the Wiring Starter Kit?

The Wiring Starter Kit contains essential components for motorcycle electrical system builds. Refer to the product page for complete contents list and compatibility with TC3/X3 control hubs.

Do BATX batteries require special chargers?

BATX batteries include compatible chargers designed for their specific chemistry (sodium-ion or LiFePO4). Use only the provided charger or chargers specified for the battery chemistry. Do not use lead-acid battery chargers on BATX batteries.

What are the seat hoop dimensions?

Cafe racer seat hoops are constructed from 24.4mm diameter tubing and measure 230mm wide. Standard and extra-long lengths are available. Verify compatibility with your motorcycle frame and desired seat length before ordering.

Key Product Families

BATX Battery Series

Lightweight motorcycle batteries in sodium-ion and LiFePO4 chemistry. Available ratings: BATX.125 (125cca, sodium-ion), BATX.155 (155cca, LiFePO4), BATX.165 (165cca, sodium-ion), BATX.205 (205cca, LiFePO4), BATX.265 (265cca, sodium-ion), BATX.385 (385cca, LiFePO4, high-output), BATX.410 (410cca, LiFePO4, high-output). All models include chemistry-appropriate chargers. Suitable for cafe racer, scrambler, and tracker builds requiring weight reduction.

TC3/X3 Control Hub Series

TC3.M: Minimalist electrical control hub using classic wiring architecture for traditional cafe racer builds.

TC3.P: Control hub designed for integration with push-button handlebar switch systems.

TC3.S: Control hub with essential functions and flexible switch options, includes standard/factory style controls.

X3.M: Multiplex electrical control hub with reduced wiring complexity and DIY switch compatibility for advanced custom builds.

X3.P: Multiplex control hub designed for integration with handlebar switch controls.

X3.S: Multiplex control hub configured with factory style handlebar controls.

All control hubs centralize electrical system management including lighting, ignition, and accessory circuits.

LITEX Switchback Module Series

LED switchback modules that enable turn signals to double as running lights. Four variants cover front single-element (LITEX.2SC), rear single-element (LITEX.1SC), front dual-element (LITEX.3SC), and rear dual-element (LITEX.3DC) lighting configurations. Designed for compatibility with Prime Moto control hubs.

SWX Switchgear Series

SWX.22M1: Single-button minimal handlebar switchgear for stripped-down cafe racer builds.

ST3.P: Push-button handlebar switch control kit with multiple button inputs for comprehensive control integration.

Both systems integrate with TC3/X3 control hubs for centralized electrical management.

LEDX Lighting Series

LEDX is Cafe Racer Garage's LED lighting product line covering headlights, turn signals, brake/tail lights, and license plate lights.

H4 VisionMaster LEDX: H4 LED headlight bulb replacement.

LEDX turn signals: R15Y, R18YR, R22Y, R22YR, R22YW, R38Y, S12Y series in varying diameters and colour combinations (orange, amber, white running light variants).

LEDX brake/tail lights: LEDX.1157R (brake and tail), LEDX.1156Y (turn signal replacement).

LEDX.LP1: LED license plate light.

Older post

Back to blog