5 3/4 inch LED headlamp PECOS TYPE 6 with daytime running light, matt black housing, housing Ø: 165mm, housing depth: 135mm, E-approved
HIGHSIDER 5 3/4 inch LED headlight PECOS TYPE 6 with TFL, E-approved
The robust, puristically shaped main headlight with matt black metal housing has high beam, low beam and parking light.
The special feature of this LED headlight is the additional equipment with daytime running lights.
The PECOS TYPE 6 is characterized by the latest lighting technology and exceptional lighting design.
The daytime running light for even greater visibility in road traffic divides the reflector into an upper and lower half.
The dipped beam lights up in the upper half of the reflector and the lower half also lights up when the main beam is switched on.
The parking light forms the outer ring around the reflector.
The simple design is ideal for classic cars, roadsters and custom bikes.
Catch the eye - give your bike an unmistakable style!
The unusual design and perfect technology of the HIGHSIDER headlight series will definitely turn your bike into a highlight! glass)
- Weight: 1250g
Additional mounting dimensions bottom:
- Mounting height: 36mm (measured to lower edge of lamp ring)
- Mounting: screw 25x12mm (thread 24G 3/16 7/32)
Additional mounting dimensions side:
- Thread: M8
- Housing depth: approx. 75mm (Measured from the center of the side mounting holes to the rear)
- Distance side mounting points: approx. 160mm
Connections
3-pin plug:
- White = low beam (+)
- Blue = high beam (+)
- Green = ground (-)
Separate cables:
- Red = TFL/DRL (+) to ignition positive
- Brown = parking light (+)
Power consumption:
- Low beam 15W at 12V (according to manufacturer 1106.2lm)
- High beam 27W at 12V(according to manufacturer 1657.9lm)
Scope of delivery: 1 piece
Optional order:
- HIGHSIDER DRL CONTROL- BOX CB1 , Daytime running light control box for vehicles without light switch, 12V Art.-No.: 208-108
- Light switch on/off with clamp for handlebar mounting e.g. item no.: 240-044
Note:
If it should happen with this product in conjunction with the HIGHSIDER DRL CONTROL BOX CB1 (208-108) that the headlight does not switch on the daytime running light after starting the engine, please proceed as follows:
Install the enclosed 120 Ohm resistor as specified in the instructions.
Now the headlight should also switch the daytime running light.
